Faucet Repair & Replacement Services in Airdrie & Calgary

---

Faucets generally drip, leak, or stop working because their internal components break down or wear out. Kitchen and bathroom faucets have different kinds of compression valves that range from ball or cartridge to compression and dip. Each of these faucet valves requires a different technique of repair, replacement and maintenance. Signs your faucet may need to be replaced or repaired include:

Your home faucet may create a whistling like sound signalling a problem. A loose washer is often the cause, but if tightening the washer or replacing it with the right size solve the problem there could be other issues within the pipes. If replacing the washer does not resolve the issue you will want to hire a professional plumber to further investigate the root of the problem.

Tiny holes in a tap can get clogged with dirt and mineral buildup and inhibit the flow of water. Plumbing blockages and leaking pipes can also cause low water pressure. If your pipes are working properly, it is more than likely the constrictor valve inside your faucet is damaged.

Faucets contain several valves or chambers depending on the style and age of your fixture, and are prone to sediment buildup most likely caused by hard water. In order to address no water coming out of the faucet, check to see if the shut-off valve is open and if there’s still no water coming out you will have to take the faucet apart and clean each chamber.

Dripping faucets are commonly caused by a dislodged or torn washer. These silicon-based seals can become stiff and corroded over time, and damaged washers will initially create a tiny trickle of water. It’s best to replace them immediately before the water pressure destroys them completely. 

Loose or worn-out seals, damaged pipes, increased water pressure, and improper fitted pipes are just a few reasons why your drain pipes may be leaking. Unlike waterline leaks, drain pipes are used to remove waste water out of your home and can cause substantial damage to your home if they fail to drain properly.

Problems in the installation process can cause leaks due to loose parts, and you can damage or lose the small parts of the unit which may require buying a new set. The simplest solution is to have a certified plumber reinstall the faucet to ensure it is installed properly. 

Sometimes, a little detective work can help you understand what’s wrong with your faucet. While most repairs require a licensed plumber, these simple checks can help you identify the problem:

• Check: Look for visible water around the spout or base.
• Possible Cause: Worn washers, O-rings, or cartridges.
• Next Step: If the leak persists after tightening connections, it’s time for professional repair.

• Check: Remove the aerator and run water.
• Possible Cause: Clogged aerator or internal valve blockage.
• Next Step: Cleaning the aerator may help, but persistent low pressure usually requires a plumber to inspect the faucet and pipes.

• Check: Turn the handle slowly and feel for stiffness.
• Possible Cause: Corrosion or worn-out cartridges.
• Next Step: Lubrication might help temporarily, but replacement is often needed for long-term smooth operation.

• Check: Listen carefully while the water runs.
• Possible Cause: Loose washers or high water pressure.
• Next Step: A licensed plumber can adjust or replace parts and install a pressure-reducing valve if necessary.

• Check: Inspect metal parts for discoloration or flaking.
• Possible Cause: Hard water or aging metal components.
• Next Step: Corroded parts should be replaced promptly to prevent leaks or full faucet failure.

• Check: Ensure shut-off valves are fully open.
• Possible Cause: Sediment buildup or blocked internal components.
• Next Step: If opening the valves doesn’t restore flow, a professional faucet inspection is required.