FAUCET REPAIR And REPLACEMENT

---

Tiny holes in a tap can get clogged with dirt and mineral buildup and inhibit the flow of water. Plumbing blockages and leaking pipes can also cause low water pressure. If your pipes are working properly, it is more than likely the constrictor valve inside your faucet is damaged.

Your home faucet may create a whistling like sound signalling a problem. A loose washer is often the cause, but if tightening the washer or replacing it with the right size solve the problem there could be other issues within the pipes. If replacing the washer does not resolve the issue you will want to hire a professional plumber to further investigate the root of the problem.

Faucets contain several valves or chambers depending on the style and age of your fixture, and are prone to sediment buildup most likely caused by hard water. In order to address no water coming out of the faucet, check to see if the shut-off valve is open and if there’s still no water coming out you will have to take the faucet apart and clean each chamber.

If rust is forming from on the exterior of your faucet’s, it has more than likely formed on the inside as well. Rust can affect the quality of your tap water, and it is not recommended to drink water from a rusty faucet.  

Dripping faucets are commonly caused by a dislodged or torn washer. These silicon-based seals can become stiff and corroded over time, and damaged washers will initially create a tiny trickle of water. It’s best to replace them immediately before the water pressure destroys them completely. 

 Problems in the installation process can cause leaks due to loose parts, and you can damage or lose the small parts of the unit which may require buying a new set. The simplest solution is to have a certified plumber reinstall the faucet to ensure it is installed properly.